|
This is a relatively simple mod, but because of the ease at which the trigger PCB can break it should not be undertaken if you do not have a spare board, or a replacement board of the same dimensions available. Undertake this mod at your own risk.
To do this mod you will need:
|
Mouser Part #: |
633-MB241109-RO |
|
Manufacturer Part #: |
MB2411E1G01-RO |
|
Data Sheet: |
Switch Cost: $5.60 each |
|
Description: |
Pushbutton Switches SPDT ON-(ON) SLDR AU |
and:
-
Philips head screw driver (to open the tagger)
-
Soldering iron and solder
-
Long nose pliers (holding wires while soldering and tightening nuts on the switch)
-
Dremel or similar cutting tool
-
15/64" drill bit, drill and some means of holding the PCB while drilling (Drill Press recommended)
-
extra trigger PCBs (the board does not drill easily, practice on some cheap board from Radio Shack)
INSTRUCTIONS (including typos like "brokken"... but I am not redoing the pictures)
View the pictures in this album by scrolling and clicking on the thumbnails.
|